«A-Line N»
NEUTRALIZING AGENT for MONGOOSE F-1
NEUTRALIZING AGENT for MONGOOSE F-2
Designation
This agent is made for chemical neutralization after cleaning ceramic metal rollers using acidic printing ink washing solutions such as MONGOOSE F-1 and MONGOOSE F-2. Ready-to-use solution. Ready-to-use solution.
Ingredients
Sodium salt of carbonic acid, modified, inhibited.
- A special formulation for chemical neutralization after cleaning ceramic metal rollers using acidic printing ink washing solutions such as MONGOOSE F-1 and MONGOOSE F-2.
- White crystalline powder
- Non-flammable
- Non-explosive
- Safe to use for acidic solutions neutralization
- Biodegradable
- Contains corrosion inhibitor, which inhibits corrosion on metal after acid etching
- Bulk density is 0.8 g/см3
After finishing the deep cleaning of an anilox roller using acidic wash solutions such as MONGOOSE F-1 and MONGOOSE F-2, apply the A-Line N neutraliser on the roller by any convenient method, in approximately 1:1 ratio to the previously applied washing solution. Rub it in by hand (using chemical resistant gloves, as right after application starts an exothermic reaction, which is the neutralization reaction), wait for 1-2 minutes; or first wash off the washing agent from the roller together with ink, varnish and primer into a container and then apply the neutralizing agent. As soon as the neutralization is completed, wash the roller under the heavy flow of running water, wipe with a clean rag and let dry.
- Only personnel trained in handling chemicals is allowed to work with this product
- Use respiratory system, eyes and hand protection equipment when working with this product
- Use aprons for clothing protection
- Keep away from children
- Do not smell
- Do not inhale
- In case of contact with open areas of the body, rinse off with water immediately, in case of intoxication contact a doctor
Store at -10 - + 30°С, in a tightly closed container, away from heat and direct sunlight.
from 2 to 5 years.
0.8 kg cans; 1 kg, 7 kg and 14 kg buckets.
Disclaimer
The above given data are average values available at the time of publication of this technical information. They can not be considered as the basic specification. Product data are presented in the detailed technical specifications.
When using the product, please strictly follow the recommendations and information given in the product description, safety data sheet and chemical safety precautions.
Information given in this publication is based on our present knowledge and experience.
As many factors can influence the processing and use of the product, the provided data does not relieve our customers from the necessity to carry out their own tests.
These data do not constitute a legally binding guarantee of certain properties of the product or a guarantee of its suitability for a particular purpose. The users of our products are obliged to take their own responsibility for compliance with applicable laws and regulations of the Russian Federation.
